Docket Number:02A-990422
Inventor:Wei-Li Lee, Chi-Chih Ho, Keng-Hui Lin and Wen-Tau Juan
IP Status:US pending, TW pending
Abstract:
A new technique to prepare large area monolayer of close-packed nanospheres with triangular lattice structure. It is simple and can apply to polystyrene nanospheres with various sizes. Because of the polymer bridging effect, there is strong bonding between nanospheres to ensure a robust lattice structure that can be transferred to a substrate of any kind while keeping its original structure.
Fields of Application:
I. Application in optics:
(a) It can be used in the diffusion film fabrication for the display panel production line. In the large area of close-packed nanospheres with triangular lattice structure, each nanosphere can serve as a point scatterer for the incident light so that the light intensity can be dispersed and becoming uniform.
(b) The gradient in index of refraction resulting from the difference in the polystyrene and the substrate can effectively reduce the reflection effect.
(c) The large area of close-packed nanospheres with triangular lattice structure can be used as a substrate to enhance the effect of surface Raman scattering, which can greatly improve the sensitivity in optical detection tools based on Raman scattering effect.
II. Application in nanofabrication process: Combining with the nanosphere lithography technique, one can achieve fabricating large area ordered nanostructures at much lower cost and higher time efficiency. There are many possible fields for the application listed below.
(a) Magnetic storage device.
(b) Photonic crystal.
(c) Imprint mask for the nano-imprint tool.
(d) Fabrication of the porous film structure in solar cell device to increase the surface area an hence the reaction rate.
(e) Artificial surface roughening for the self-cleaning surface with enhanced hydrophobicity.
(f) Combining with the dielectrophoresis effect, large area ordered nanostructures can be used as a mechanism for cells and particles separation and sorting.
Advantages when compared to the existing technologies:
1. The self-assembly of nanospheres at the water/air interface. They formed close-packed triangular lattice structure which is very robust also.
2. The resulting monolayer of close-packed nanospheres can reach the highest number density.
3. Due to the special bridging mechanism between nanospheres, it can provide excellent structure robustness and protection during the substrate transfer process.
4. This technique can apply to various sizes of polystyrene nanospheres.
Contact Person:
對本技術有興趣,請於本處網頁廠商選項下(廠商需求與諮詢)網頁填寫資料,承辦人將跟您聯絡。
If you are interested in this technology, please fill in the information on the webpage under the manufacturer option (Apply for Technology Licensing, Material Transfer, or Sponsored Research) on the website of this office, and the undertaker will contact you
