Updated time: 2021-11-15 14:12:19
A novel ionic liquid-based electrofluidic circuit for pressure sensing is reported. It is made of electrofluidic layer and microfluidic layer with a deformable membrane in the middle. Ionic liquid is filled in the microchannel in the eletrofluidic layer to construct an electrofluidic Wheatstone bridge and one variable resistor of the bridge is aligned to the monitored position of the microfluidic layer. The output voltage of the bridge is linear to the deformation of the membrane which is induced by the pressure in the microfluidic layer.
The device can be seamlessly integrated with the conventional microfludic biomedical devices and chips by the multilayer soft lithography (MSL), for example, the device made of poly-dimethylsiloxane (PDMS). Compared to the conventional piezoelectric and optic methods, this technology requires only simple fabrication process. Its simple configuration can be applied to large-scale measurement in the microfluidic device. Because the ionic liquid-based electrofluidic Wheatstone bridge has the direct electrical read-out interface, it is highly compatible with advanced electrical circuits. The ionic liquid is thermally stable and has no significant evaporation, and the bridge circuit design is temperature-compensated. Therefore, the device has great long-term and thermal stability, and it can be used to monitor the pressure in the cell culture chips and biochips with thermal cycles. In sum, the device can be comprehensively integrated with the microfluidic biomedical devices and chips.
26A-1000408
TW I443321、US 8,887,574 B2
The device can be applied in precise control of the microfluidics for the bio-detection chip and microfluidic reaction chip etc. It can also be used to monitor the pressure parameters for a long time in the microfluidic cell culture platform. Furthermore, the potential applications can be the manipulation of the sample and cells in the microfluidic chip, calibration of the physical characterization of the microfluidic device, and measurement of the fluidic motion of a single cell or micro-particles.
Yi-Chung Tung, Chueh-Yu Wu, We-Hao Liao
If you are interested in this technology, please fill in the information on the webpage under the manufacturer option (Request for Technology Licensing, Material Transfer, or Sponsored Research) on the website of this office

Integrated Electrofluidic Circuits for Microfluidic Pressure Sensing