Docket Number:14A-990520
Inventor:Chen Chao-Jung, Tseng Mei-Chun, Chen Yet-Ran
IP Status:US 9,267,927B2、TW I458973
Abstract:
In capillary liquid chromatography (capillary LC), frit is crucial in the fabrication of LC column. To date, many methods have been provided to improve the frit preparation. Unfortunately, the frit fabrication is still not highly reproducible leading to variation in column performance. In addition, capillaries are fragile at the position of the frit since the polyimide coating is removed during frit fabrication. We designed a novel frit fabrication method by having a tunnel in the frit. This tunnel frit does not have problems described above. The tunnel frit is highly reproducible, robust and can be applied to ultrahigh-pressure LC system.
Fields of Application:
Capillary liquid chromatography was widely used in protein, peptide, metabolite, and medicine analysis, In additional to the fabrication of trap column to analytical column in liquid chromatography system; the frit can also be used to fabricate C18, C8, TiO2 or any other stationary phase columns for off-line sample.
Advantages when compared to the existing technologies:
One of the commercial frit is fabricated by sintering method in which the method is not highly reproducible and the protected polyimide of the column end was removed. Therefore, the column end is fragile and can not be applied to ultra-high pressure system for higher performance separation. The other commercial frit was made by stainless steel. The fabrication cost is high and stainless steel can adsorb phosphopeptides which results in the reduced phosphopeptide detection sensitivity. Our tunnel frit is more robust, low backpressure and can successfully sustain high pressure up to 10,000 psi without pressure drop. The tunnel frit has also been proved to have higher phosphopeptide detection sensitivity in comparison to the commercial frit.
Contact Person:
對本技術有興趣,請於本處網頁廠商選項下(廠商需求與諮詢)網頁填寫資料,承辦人將跟您聯絡。
If you are interested in this technology, please fill in the information on the webpage under the manufacturer option (Apply for Technology Licensing, Material Transfer, or Sponsored Research) on the website of this office, and the undertaker will contact you
