Docket Number:07A-1021125
Inventor:Lain-Jong Li, Zhen-Yu Juang
Patent Status:TW I518198
Abstract:
Low-dimensional layered materials such as graphene, boron nitride, transition metal dichalcognides, etc. have been considered promising for low-power, transparent and flexible electronics. For the synthesis of such materials, our CVD reactor allows the precise control with the use of clean solid precursors such as metal, metal oxides, metal sulfides, and so on. The new design combines three features: (a) imbedded tubular heater, (b) temperature-controllable shower head and (c) a special designed assistant control valve positioned between (a) and (b). These new features allow the wafer-scale growth of high-quality low-dimensional layered materials with either solid, liquid gas precursors without precursor clogging issues.
Fields of Application:
- Wafer-scale synthesis of low-dimensional layered materials.
- Wafer-scale synthesis of graphene.
- Wafer-scale synthesis of boron nitride.
- Wafer-scale synthesis of transition metal dichalcognides.
Advantages when compared to the existing technologies:
- The commonly used hot-wall CVD with tubular furnace for low-dimensional layered materials is hard to be scaled up for high throughput, especially for wafer scale. Our design offers a wafer-scaled compatibility to industries.
- In common cold-wall system, the solid and liquid precursors are always used for thin film deposition, and the precursors must be vaporized by heating up to a certain temperature in external furnace. The vaporized precursors are usually condensed in pipe lines during transport. In our new design, the vaporized precursors will be transferred from tubular furnaces to shower head immediately, which lower the probability of precursor condensation.
- In common cold-wall system, the quantity of precursors could only be controlled by the flow of carrier gas. The flow rate of precursor’s vapor would not down to zero even the carrier gas is turned off due to the gradient of concentration between main chamber and sources of precursors. Herein we introduce a new type of control valve. This design can further fine tunes the quantity of precursor effectively, and achieves the ultimate precise control of the synthesis of low-dimensional layered materials.
Contact Person:
對本技術有興趣,請於本處網頁廠商選項下(廠商需求與諮詢)網頁填寫資料,承辦人將跟您聯絡。
If you are interested in this technology, please fill in the information on the webpage under the manufacturer option (Apply for Technology Licensing, Material Transfer, or Sponsored Research) on the website of this office, and the undertaker will contact you
